The material is acidic dry ramming material, the lining material is premixed dry ramming material, the selection of high temperature binder has strong crack resistance, the selection of better quartz sand quartz powder has high temperature resistance. High temperature up to 2000 degrees, widely used in non-ferrous metal and ferrous metal continuous operation and intermittent working environment. This material is used for smelting plain steel, 45# steel, high gong steel, high manganese steel, special steel and a series of metal materials. The use of the furnace can reach more than 120 times. Up to 195 times. ZH2 type material is used for melting gray iron, which can be used more than 300 times and up to 550 times.

The above information is provided by the manufacturer of dry beating materials

         Medium frequency furnace ramming material is divided into dry punching material and wet punching material according to the construction method, the two mainly have the following differences:

         First, the construction of dry punching materials rely on high-frequency vibration to make the material flow and exhaust, so as to obtain relatively dense furnace lining; The wet beating material is mixed with water and then the exhaust gas is rammed with a wind gun to obtain a dense lining.

         Second, after the construction of dry punching, the mold melts together with the scrap steel in the oven process, and the wet punching mold can be used repeatedly.

         Third, the dry punching material is generally suitable for the furnace with a relatively large volume, and the wet punching material is generally suitable for the small medium frequency furnace.

Anaijie dry punching material manufacturers have two sets of integrated automated production equipment, scientific management level, products and services are widely favored by consumers, welcome customers to visit! We will be happy to serve you!