First, the use of electric furnace building machine

Electric furnace building machine is a special tool for ramming furnace lining of induction furnace, which can greatly improve the labor intensity of workers.

   Electric furnace building machine is a kind of vibration equipment using 220V or 380V power frequency alternating current, the purpose of using electric furnace building machine is to achieve the effect of compacting the furnace lining material.

The electric furnace builder directly applies the vibration force to the surface of the furnace lining material, and the compaction effect is affected by the operator to a certain extent.

Second, the structure and characteristics of electric furnace building machine:
The vibration source of electric furnace building machine is made of three-phase asynchronous motor and assembled with corresponding tamping pin, flat hammer, side hammer, flat shovel and other furnace building tools. The furnace building machine with aluminum shell body has the advantages of lighter weight, slow motor temperature rise, reasonable structure, easy operation and low noise.

3. Main specifications and technical performance

Four, the use of electric furnace building machine conditions:  
The ambient temperature varies with the season, but generally should not exceed -20~-40℃; Not more than 1,000 meters above sea level;  

Frequency: 50HZ. Rated voltage: the motor power is 150-180W,380V, the factory press 380V ";Y"; connection.

Working mode: Continuous

Five, the characteristics of electric furnace building machine: 
1. Friendly to the environment, less dust; 
2. Reduced personnel demand;  
3. Reduce the furnace time and save the labor of workers; 
4. The lining is knotted more evenly;  
5. It can be achieved. Best compactness;  
6. Longer service life of furnace lining, more stable furnace life.  
7. Light and simple body, easy to operate. 

The electric furnace building machine is mainly used to make the lining of the intermediate frequency melting furnace, and belongs to the special tool for tying the lining. The electric vibrator of our company adopts the original vibration motor imported from Italy ITA. The motor is made of aluminum alloy shell by die-casting. The motor is light weight, no heat, uniform and powerful vibration, and has a three-year warranty.

According to the vibration force generated by the eccentric wheel driven by the motor, the electric furnace building machine transmits the vibration force to the sand through the furnace lining vibration and the furnace wall vibration plate, compacts the sand and discharges the air in the sand to achieve a high filling density between the sand and the sand.

Electric furnace building machine adopts low-power three-phase vibration motor, vibration frequency 2900 RPM, frequency 50HZ, vibration force 1000-2000N, at least 0.3~0.5MPa pressure; In order to facilitate the use of workers, the motor is required to use an aluminum alloy shell, which is lighter in weight. To make the knot stronger and more durable. And not only up and down power, but also in the furnace to do local rotation, bias and other movements.

The above Hubei Anaijie provides!