Current location：
hot product
hot news
message
detail
The main advantages of pneumatic vibration furnace building machine:
1, the pneumatic furnace building machine can reduce manpower and shorten the working time.
Use the pneumatic furnace beater to tie the furnace lining, one to two people can operate, put the mixture into the furnace and the induction ring at one time, control the drive to drive the pneumatic vibrator from the bottom up, reduce manpower, and greatly shorten the operation time (10T intermediate frequency melting furnace knotting, only 1 hour can be completed).
2, the pneumatic furnace building machine is the inner wall of the knotting crucible, so that the knotting effect is uniform and detailed.
After one-time input of the mixture, the pneumatic beater rotates from the lower part of the wall to the upper part, so that the knotting of the mixture is very uniform, and it is not easy to occur the phenomenon of the furnace liner skew, and the thickness of the knotting furnace wall is uniform.
3, one-time knotting, pneumatic furnace building machine in the furnace no foreign matter mixed.
Because the mixture is put into the furnace at one time, the pneumatic vibrator can close the feeding place when it is knotted inside, so there will be no foreign matter mixed in.
4, the thickness of the sintering layer knotted by the pneumatic furnace building machine is uniform, and the powder layer can be maintained, which is more detailed than the manual knotting.
The vibrating mixture of the pneumatic furnace building machine is uniform and meticulous, and the furnace liner is not prone to deviation during vibration, and there is no foreign matter mixed in the mixture, which can reduce the local erosion caused by foreign matter mixing, maintain the average thickness of the sintering layer, and maintain the powder layer, and the Yin is broken due to the occurrence of local erosion deep water seepage during the work (that is, prevent leakage of the furnace).
5, the knotting of the pneumatic furnace building machine adopts the internal knotting method, which will not have dust and other pollution.
6, the pneumatic vibrator spins when tying the furnace liner, the vibration force is always maintained at 1800N, and the furnace liner is knotted evenly and firmly.
7, the traditional punching method needs to consume a lot of manpower and time, so it can not adapt to the current production needs, and the use of rotary pneumatic punching machine can solve and reduce production costs.
The above Hubei Anaijie provides!
