Intermediate frequency furnace lining is intermediate frequency furnace equipment. An important part, because the lining of the intermediate frequency furnace has many uses, it has a great impact on the results that it can achieve in use, and the following basic lining material Xiaobian will introduce what aspects affect the intermediate frequency furnace lining.

   Five aspects that affect neutral lining materials:

1, the loading criteria of the intermediate frequency furnace: First of all, we must determine the reasonable loading amount of the converter, the suitable ratio of hot metal and scrap steel. However, in determining the loading capacity of the converter, in addition to considering the appropriate furnace volume ratio, the appropriate depth of the molten pool should also be considered, so as to protect the bottom of the tube from the impact of the oxygen jet, and the depth of the molten pool must exceed the penetration depth of the oxygen flow to the molten pool.

2. Oxygen supply criteria of intermediate frequency furnace: To determine scientific and reasonable oxygen supply criteria, the speed of impurity removal, melting pool heating and slag formation has an impact on the converter smelting and the service life of the lining.

3, the temperature criteria of the intermediate frequency furnace: under the premise of steel pouring content, the lower the temperature control of the steelmaking process and the end temperature, the more favorable the life of the furnace lining.

4, the furnace volume ratio of medium frequency furnace: the furnace volume ratio is too large will increase the cost of steelmaking, and the furnace volume ratio is too small will show splashing, thereby reducing the service life of the furnace lining. So it is very important to design a reasonable furnace volume ratio of intermediate frequency furnace.

5, the quality of the original data: when the intermediate frequency furnace equipment steelmaking, the quality of the original data used has a great impact on extending the life of the lining.

The above information is provided by the intermediate frequency lining material manufacturer! Anaejie factory reserves up to tens of millions of tons of microcrystalline quartz deposits, this special high-purity silica raw materials, with high refractibility, high corrosion resistance and good thermal shock stability, for the company to produce high-quality, low-cost acid lining materials to provide a large number of stable mineral sources. Welcome to telephone consultation!