In intermediate frequency furnace equipment, intermediate frequency furnace lining is very important. So, what are the aspects that affect the intermediate frequency furnace lining? Below, take a look at the content shared by the furnace lining material sales manufacturers!

    1. Loading criteria: First of all, we must determine the reasonable loading amount of the converter and the suitable ratio of hot metal and scrap steel. However, in determining the loading capacity of the converter, in addition to considering the appropriate furnace volume ratio, the appropriate depth of the molten pool should also be considered, so as to protect the bottom of the tube from the impact of the oxygen jet, and the depth of the molten pool must exceed the penetration depth of the oxygen flow to the molten pool.

    2, oxygen supply criteria: to determine a scientific and reasonable oxygen supply criteria, the speed of impurity removal, melting pool heating and slag formation has an impact on the converter smelting and lining service life.

    3, temperature criteria: under the premise of steel pouring content, the lower the temperature control and end temperature of the steelmaking process, the more favorable the life of the furnace lining.

    4, furnace volume ratio: the furnace volume ratio is too large will increase the cost of steelmaking, and the furnace volume ratio is too small will show splashing, thereby reducing the service life of the furnace lining. So it is very important to design a reasonable furnace volume ratio of intermediate frequency furnace.

    5, the quality of the original data: when the intermediate frequency furnace equipment steelmaking, the quality of the original data used has a great impact on extending the life of the lining.

    The above content sharing is here, want to know more please pay attention to Hubei Anaijie Lining Material Co., LTD. Website, welcome to contact us!