The goal of kiln masonry technology is to seek. Refractory bricks and mortar close to the above requirements.

Whether it is a dry boiler, a sun pond furnace, a cross fire smoke furnace, a horseshoe flame furnace, a unit furnace, an electric furnace, or a furnace using other heating systems and melting systems, its main components are the feeding part of the blending material used in melting, the melting part, the clarifying part, and a variety of material withdrawal parts. In addition, each melting kiln also needs to have a melt groove or crucible, kiln superstructure, etc. The kiln that burns the fuel also has a combustion device (small furnace) as well as flue and air preheating

Installations and chimneys, etc. Full electric melting kiln does not need to install small furnace and exhaust device.

The following five characteristics must be advantageous to the glass melting process:

(1) The refractoriness must be higher than the melting temperature of the glass;

(2) as far as possible not to cause glass defects in the glass melt such as stones, bubbles, nodules, streaks, etc.;

(3) as far as possible do not dissolve or erosion, so that the furnace has a long service life, melting is also uniformly dissolved and should not be damaged in a certain part in advance;

(4) can be supplemented at any time according to quality and quantity;

(5) The price is reasonable under the condition of meeting the quality requirements.

The refractory material in the kiln to complete the task is a variety of, so the quality and use of refractory bricks and mortar are also very different.