In the previous content, we already know that the ramming material is not named by the composition of the lining material, but by the construction method of the lining material, so there are more types according to the composition of the ramming material. The composition of ramming materials is different, and the construction method is also different. The following Hubei Anaijie ramming material as an example to give you a brief introduction to the construction method!

The construction of high aluminum ramming materials can generally be divided into two steps:

1. Mixing: First, the coarse and fine aggregate and binder in the specified ratio and dosage (high aluminum cement, respectively, are added to the forced mixer for dry mixing for 1 ~ 2min), followed by the addition of quantitative water for mixing and stirring for about 5min.

2, construction: The thickness of the mixed ramming material is 80 ~ 100mm at a time, and the pneumatic hammer is used to continuously and evenly ramming to achieve the reciprocating times of the specified volume weight.

If you want to further understand the construction method of ramming materials in lining materials, you are welcome to call Hubei Anaijie ramming materials manufacturers for consultation or continue to pay attention to our website!