Hubei Annijie Furnace Lining Materials Co., Ltd

CN/中文
Hotline0710-7869688
Current location Current location: Home > News > Industry news
News
News

News

News

hot producthot product
左
右

Medium frequency furnace liner manufacturers tell you how to use high temperature castable?

High temperature resistant castable is a cement-based mortar specially prepared by factory by adding admixtures and admixtures to aluminate cementing materials and special aggregates with good fire res……

日期 2021-11-12

What is blast charge? If you want to know the specific introduction of the furnace material, please come to Annaijie furnace lining material manufacturer

The blasting material is a dry material composed of corundum, micro powder, chromium oxide green and other raw materials. The construction part of the charge is different, and the construction method i……

日期 2021-11-09

How to choose the spray filler for EAF lining? Please see the introduction of Anetje!

In the production process of EAF steelmaking, it is a very common method to improve the service life of EAF refractory lining by spraying repair material. Generally, the material of the aggregate in th……

日期 2021-11-06

The necessity of accelerating technological innovation in China s refractory industry

Under the strong pull of the rapid development of high-temperature industries such as iron and steel, nonferrous metals, petrochemicals, and building materials, the refractory industry has maintained a……

日期 2021-11-04

How to reserve sources for castable expansion joints?

1, shrinkage and expansion of refractory castable refractory castable in... During the heating process, there will be two volume shrinkage when dehydration at 50℃ ~ 200℃ and sintering at 900℃ ~ 1000……

日期 2021-10-27

The difference between refractory mixer and refractory mixer

In refractory occupations, mixers and mixers are two commonly used homogenizing equipment. Whether you choose a refractory mixer or a refractory mixer, the ultimate intention is to achieve a uniform co……

日期 2021-10-25

There is a certain interaction between refractory and glass melt

The goal of kiln masonry technology is to seek. Refractory bricks and mortar close to the above requirements. Whether it is a dry boiler, a sun pond furnace, a cross fire smoke furnace, a horseshoe fla……

日期 2021-10-22

Hubei Anaijie manufacturers scientific explanation: castable cement kiln castable classification

In China, the new dry cement process is developing rapidly, and the lining design and brick shape of PC and SP kilns are also very complicated. In order to adapt to this situation, practice has proved ……

日期 2021-10-20

What are the names of lining materials in medium-frequency induction furnaces?

Lining materials used in the medium frequency electric furnace lining there are many different names, for different regions or just into the new may not understand, here Hubei Anaijie lining materials ……

日期 2021-10-18

What is the function of the coil cement of the intermediate frequency furnace?! See the six details below!

Medium frequency furnace is currently the most commonly used induction heating equipment in the mechanical industry, the coil of the medium frequency furnace is the key component of the medium frequenc……

日期 2021-10-13

What are the characteristics and advantages of low cement refractory castable? Four in all! See below

Characteristics and construction process of low cement refractory castable, low cement refractory castable is a common amorphous refractory product in the refractory castable series. Low cement castabl……

日期 2021-10-12

Hubei Anaijie to introduce: intermediate frequency furnace lining repair material specific information!

Medium frequency furnace repair material, also known as medium frequency furnace repair material, is a plastic repair material with aluminum oxide as the main raw material and special chemical raw mate……

日期 2021-10-08